Cubica

From the model to the bill of quantities.

The steps, what you get at the end, and how the algorithm measures each discipline.

Three steps. No friction.

From your BIM model to a structured deliverable, in a few days.

01

You send your model

The BIM model in Revit (.rvt) or IFC, and a short briefing on what you need. For seismic assessment, plans and sections work without a BIM model, with the modelling add-on stated on the service page.

→
02

We process and validate

Algorithmic reading of the model, classification by typology, and plausibility checks on the extracted values (not on the design itself) through Cubica's own engines.

→
03

Receive the right deliverable

Measurements: a structured Excel file by category, with totals per floor and unit, ready for your bill of quantities (BOQ) — always accompanied by a 2D/3D drawing of the geometry, layered and colour-coded, with each element's ID and floor. Seismic assessment: a signed technical report, with a vulnerability classification and a clear recommendation.

The measurements dossier arrives organised by category — tables ready for estimating and site work, plus a drawing of the measured geometry to check against the model.

How we measure each discipline.

Dimensional extraction matrix
The algorithm adapts to the physical nature of every discipline.
1D Linear 2D Surface 3D Volume Count Unit
Concrete & Formwork ✓✓
Rebar ✓✓
MEP · Networks & Equipment ✓✓
Architecture ✓✓✓✓
Earthworks ✓✓
External Works ✓✓✓